Can I place a phone call with a programming telephone plugged into the phone jack?
No. This phone jacks only purpose is to program the dialer.
When I put a channel in alarm the "Ring Active" light blinks on then off and does not call out.
When the dialer is issued an alarm it looks for a active phone line, if it does not see one the "Ring Active" light will blink on and off. Make sure the dialer is plugged in to a active phone line.
Can I put 110VAC to the inputs?
No. The dialer accepts only dry contacts. Connecting external voltage will cause damage to the dialer and will not be covered under warranty.
Can the DialStat call different phone list for each channel?
No. The DialStat has 1 list of 8 numbers.
Is there a command to reset the dialer to factory default?
Yes. **07 Will reset the System and Channel programming to default. This command will not have any effect on Telephone Numbers or Voice Messages.
How do I add minutes to my CellStatTM.
CellStatTM uses prepaid cellular service from either AT&T or T-Mobile. You will need to know the phone number and the carrier that is printed on the label. Information for AT&T and T-Mobile is listed below.
AT&T
Online: http://www.cingularrefill.com
Phone: CingularGoPhone 800-901-9878
Retail Stores: Purchase Pay As You Go refill card
T-Mobile
Online: Visit http://my.t-mobile.com
Phone: T-Mobile To Go 877-778-2106
Retail Stores: Purchase T-Mobile To Go refill card
